The SoundPoint IP 430 is the small-footprint two-line HD-voice phone Polycom shipped in the late 2000s — slightly larger display than the 320 series, full SoundPoint handset, designed for compact desks. EOL'd 2015; still supported on voip.army's legacy provisioning network.
The SoundPoint IP 430 was Polycom's compact two-line HD-voice phone — released 2007, EOL'd 2015. The chassis was smaller than the IP 330, the display slightly larger (132×46 instead of 102×33), and the styling more streamlined for executive-style desks where a full-sized SoundPoint felt too bulky.
It became popular in law firms and consulting practices that wanted Polycom's audio on partner desks without the visual footprint of a 330 or 501. We still see them in production at customers who deployed them in 2010 and haven't had a fleet refresh since.
For existing fleets, the 430 onboards onto voip.army's legacy provisioning VLAN running UCS firmware 4.0.15. For new orders the modern compact equivalent is the VVX 150 or VVX 250 — both fit a similar footprint and run the current firmware track.
| Display & user interface | |
| Display | Backlit 132×46 pixel monochrome graphical LCD |
| Line keys | 2 line keys with dual-color LEDs |
| Soft keys | Context-sensitive under the display |
| VoIP & SIP | |
| SIP accounts | 2 |
| SIP protocols | SIP v2 (RFC 3261), supported on voip.army's legacy provisioning VLAN with UCS firmware 4.0.15 |
| Codecs | G.711, G.722, G.729AB, G.726, iLBC |
| Audio | |
| Speaker | Full-duplex with Polycom Acoustic Clarity |
| HD voice | G.722 wideband on handset/speaker |
| Headset | RJ9 headset jack |
| Connectivity | |
| Ethernet | Dual 10/100 Mbps |
| PoE | IEEE 802.3af Class 2 |
| Power & physical | |
| Power source | PoE 802.3af Class 2 (preferred) or Polycom power adapter (sold separately) |
| Weight | 0.96 kg |
| Dimensions | 245 × 215 × 85 mm |
| Wall-mountable | Yes |
| Lifecycle status | |
| EOL year | 2015 |
| Firmware on voip.army | Polycom UCS 4.0.15 (legacy provisioning VLAN) |
| voip.army stock | Refurbished / pre-owned, tested and re-flashed |
The SoundPoint IP 430 runs Polycom UCS firmware 4.0.15 — the last release that supports this hardware. It onboards onto voip.army the same way as any current phone, just on our legacy provisioning VLAN because the phone's TLS stack predates modern web standards. Call quality is normal SRTP.
Boot, fetch config from our provisioning server, register, ready. About one minute on a normal internet connection.
Run up to 2 simultaneous SIP registrations. Each line key has a dual-color LED for status.
Bringing your own? Send us the MAC, factory-reset, plug in. No charge to add it to the fleet.
Last firmware Polycom shipped for this phone (2018). Still works perfectly on voip.army; provisions over our isolated legacy VLAN because the phone can't speak TLS 1.2.
PC pass-through port on the back lets you daisy-chain a single ethernet drop to phone and computer.
Class 2. Any 802.3af-compliant switch from the last 15 years will power it without issue.
Send us a CSV of MAC addresses. We add them to the provisioning server, you factory-reset and plug in, they pick up their voip.army config within a minute.