A DECT 6.0 base station that registers up to 10 SIP accounts, pairs with up to 5 DP720 / DP730 cordless handsets, and supports multi-base roaming for larger-coverage deployments. The DP750 is the brain of the cordless setup — the handsets are useless without it.
The DP750 is the SIP endpoint in Grandstream's DECT cordless system. It registers up to 10 SIP accounts (so 10 simultaneous extensions across all paired handsets), pairs with up to 5 cordless handsets (DP720 / DP730), and connects to your network via wired ethernet — typically PoE-powered, sitting in a wiring closet or on a shelf.
Single-base coverage is roughly 50m indoor through typical office walls, 300m outdoor in clear conditions. For larger deployments, you can stand up multiple DP750 bases in a multi-base setup (managed centrally), and handsets roam between them as users move through the building. This is the right architecture for warehouses, retail floors, hospitality back-of-house, multi-story office buildings with weak signal between floors.
The math: a single DP750 + 3 DP720 handsets lands around $340 total ($129 base + 3 × $69 handsets), which is meaningfully cheaper than buying three separate desk phones plus Wi-Fi handsets. For 5+ cordless users in a single building, this is the economical choice.
Where to skip it: if you only need one cordless user (a single Wi-Fi handset like the WP822 may be cleaner), or if your office is so large that 5 handsets per base will not be enough and you need to stand up 3+ bases anyway — at that point, look at Grandstream's higher-capacity DP755 (which supports 10 handsets per base and is the better long-term choice for 15+ cordless deployments).
| Type & SIP | |
| Type | DECT 6.0 base station with SIP endpoint |
| SIP accounts | Up to 10 SIP accounts simultaneously |
| Handsets per base | Up to 5 paired DP720 / DP730 handsets |
| Concurrent calls | Up to 4 simultaneous calls per base |
| VoIP protocols | |
| Protocols | SIP RFC3261, NAT (STUN), TLS, SRTP, BLF |
| Codecs | G.711a/u, G.722, G.726, G.729A/B, iLBC |
| Provisioning | TR-069, XML, GDMS |
| Wireless | |
| DECT | 1.9 GHz DECT 6.0 (US) / DECT (EU) |
| Range | Up to 50m indoor, 300m outdoor (line of sight) |
| Multi-base roaming | Yes — bases pair into a single coverage zone, handsets roam automatically |
| Encryption | DECT-standard encryption (AES) on all RF links |
| Connectivity | |
| Ethernet | 10/100 Mbps single port |
| PoE | IEEE 802.3af Class 1 |
| Power | PoE preferred, 5V DC adapter optional |
| Physical | |
| Dimensions | 100 × 100 × 26 mm |
| Weight | Approximately 0.2 kg |
| Mounting | Wall-mount or shelf |
| In the box (from voip.army) | |
| Included | DP750 base station, ethernet cable, 5V DC adapter, wall-mount bracket, provisioning card |
| Not included | DP720 / DP730 handsets (sold separately) |
Plug the DP750 into PoE and ethernet. About a minute later it has registered to your extension. Same auto-provisioning flow as every other supported phone — no SIP credentials to type, no firmware to chase.
Boot, fetch config from our provisioning server, register, ready. About one minute on a normal connection.
10 lines per phone. Each line key has a dual-color LED for status at a glance.
Programmable mapped from the voip.army portal — BLF, paging, parking, transfer destinations.
Bringing your own? Send the MAC, factory-reset, plug in. No charge to add it to the fleet.
Standard PoE — any 802.3af-compliant switch from the last 15 years powers the phone without an adapter.
Provisioning template tested against every Grandstream firmware release for DP750. We catch regressions before they reach your fleet.
Tell us how many you need and what extensions to map. We ship pre-configured next business day; you plug them in and they work.